| To help you along with your CCNA 640-802, CCENT, | | | | direct, the other goes through another switch. You |
| and CCNP certification studies, here are some free | | | | want to lessen the delay that will occur if the current |
| Cisco certification practice questions! | | | | root port goes down. What Cisco feature can help? |
| Cisco CCNA 640-802 / CCENT Certification: | | | | Answer: Uplinkfast can help. When the root port goes |
| Which of the following is NOT true regarding a Cisco | | | | down, the currently blocked port will be placed info |
| router's default settings? | | | | forwarding mode almost immediately. |
| A. HDLC is the encapsulation type on Serial interfaces. | | | | CCNP Certification / ISCW Exam: |
| B. Password encryption is enabled. | | | | Users who telnet successfully into your router should |
| C. Router interfaces will be closed. | | | | be placed directly into privileged exec mode. What |
| D. IP addresses are not assigned to the router's | | | | command will accomplish this? |
| interfaces. | | | | Answer: Use the command privilege level 15 under the |
| Answer: B. By default, password encryption is disabled. | | | | VTY lines. |
| You can enable it with the global command service | | | | CCNP Certification / ONT Exam: |
| password-encryption | | | | You're working with a serial interface set to T1 speed. |
| CCNP Certification / BSCI Exam: | | | | By default, what queueing scheme is running on that |
| By default, how does an OSPF routing table indicate | | | | interface? |
| routes that were learned by the OSPF domain via | | | | Answer: Weighted Fair Queueing (WFQ) runs on |
| redistribution? | | | | interfaces running at less than 2.048 MBPS speed, |
| Answer: By default, those routes are marked "E2". | | | | which is E1. |
| CCNP Certification / BCMSN Exam: | | | | Look for more free Cisco CCNA 640-802, CCENT, |
| A switch has two paths to the root bridge. One is | | | | and CCNP questions soon! |