T1 In The Business World

>commonly used, DS1 or digital signal 1 names were
A detailed look at common business broadbandgiven to the same equipment as it carries 24 digital
connections with focus on T1s.voice channels. These names are used
A T1 line is a T-carrier signaling method originallyinterchangeable within the telecommunications industry.
invented by Bell Labs in 1957, but was not implementedAs your business grows, an increase in bandwidth
into use until the 1960s. Back then, it was used formay be required. Unfortunately, the monthly rate will
intercity phone systems. Now it is often the perfectalso increase with the demand. Below is a list of all high
solution when a high speed, dependable and lowspeed business connections.
latency connection is required to support a small to• T1 - 1.544 Mbits per second
medium size business. Speeds are normally consistent• T3 - 43.232 Mbits per second
at supporting an up and down link of 1.544 Mbits per• OC3 - 155 Mbits per second
second. T1s are often referred to as digital signal 1 or• OC12 - 622 Mbits per second
DS-1 lines. This technology is widely used throughout• OC48 - 2.5 Gbits per second
North America and Japan.• OC192 - 9.6 Gbits per second
Before the high demand of bandwidth we currentlyMany times people try to compare T1 connections to
see in the world today, T1 lines were only used incable modems or DSL lines. T1s are much faster than
massive phone company offices to transfer voicethe highest speed DSL connection, and cable
calls from one location to another. Today, they are stillconnections only come near the same speed when
used by wireless carriers to transfer calls and datathey are peaking, which is not common. Cable
traffic from towers to central switches. Moremodems are generally much slower because the
commonly, they are found as a reasonably pricedbandwidth limits are shared with your local community.
alternative to growing businesses requiring a stable,So if five of your neighbors are actively using the web,
high speed connection.it will not provide you with the full throughput a cable
The name T1 was originally assigned by AT&T. The Tmodem is capable of. DSL lines have more consistent
was the next letter available in their carrier types andspeeds but are also consistently slower.
the 1 means that it is a level 1 connection. Also